Introducing our newest addition to our coilover lineup! Our 2014+ Mazda3 coilovers have been fit and road tested here in Utah and are now currently available for only $299USD as an introductory offer!
This coilover kit will lower your Mazda3 1 to 3 inches below the stock ride height. With the included wrenches, you can raise the collars to raise the ride height or turn them down the length of the coilover to lower the car. Watch our video on How To Adjust Coilovers for more info.
We aim for comfort but when lowering the car, you will need higher rates to prevent from rubbing on other components etc. so the ride will be stiffer than stock but still comfortable for a daily driver. The spring rates are progressive which means that the rates increase exponentially as it compresses. This type of spring is ideal of a daily driver for optimal comfort and performance.
This is a partially threaded kit which means that the ride height is adjusted from the pre-load of the springs. Because it is a partially threaded kit, you will need to reuse your stock upper strut mounts. If your current upper mounts are showing any wear, we do recommend that you replace them.
We cover our coilover kits against any manufacturing defect and now we also cover shock wear so even if you blow a shock by fault of your own, as long as you are the original purchaser, we will send you a replacement. Our coilovers are built to last but shocks will wear out eventually and with our lifetime warranty, you are rest assured that you will get years of use out of them.
We understand that you can't be down the car while you send in your parts to be warrantied and for that reason, to make it much more convenient for you, we will send replacements to you first then require that the claimed parts be returned for testing.
Any other questions, give us a call or you can shoot an e-mail to firstname.lastname@example.org.